Straight Edges & Rules

Fillet or Radius Gage is an external and internal radius on each leaf permits both concave and convex surfaces to be measured. The leaves are specially shaped for use in any position at any angle to measure fillets and radii in corners or against shoulders.

The Starrett S167 Radius Gage Inch Set with Holder features 1/64-17/64" radii range, 64ths increments, and 17 gages. Includes 110 Holder.

The Starrett 269 Taper Gage features .001" graduation, .100-500" range, is 2-1/2" in Length with 8 leaves.

The Starrett 269 Taper Gage features .001" graduation, .500-1" range, is 2-3/4" in length with 10 leaves. .500-1" Range, 2 3/4" Length, 10 Leaves.

Taper Gage measures hole and slot sizes. It is quick to use, very accurate, and is a convenient size.

The Starrett 66T, Inch Reading Thickness Gage with Tapered Leaves is used in automotive, aviation, diesel and farm equipment manufacture and services and also in jig, fixture, gauge and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Includes 26 leaves ranging from .0015 to .025" thickness. 26 Tapered Leaves, 1/2-1/4 x 3 1/32", .0015-.025" Range.

The Starrett 66 Inch Reading Thickness Gage with straight leaves are used in automotive, aviation, diesel and farm equipment manufacture and services and also in jig, fixture, gauge and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Includes 26 leaves ranging from .0015 to .025" thickness.

Starrett steel rules with shrink graduations feature a satin chrome finish. Graduations at 8ths, 16ths, quick-reading 32nds, 64ths. 0-180 Deg, 6", Rectangular Head 64ths.

The Starrett 380 Series Steel Straight Edge is precision ground and nicely finished to rigid Starrett standards. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Its thickness and design permit it to retain shape and accuracy, but still be portable and easy to handle. The 380 Series is not beveled or graduated. The 385 Series are beveled one edge, but not graduated. The 387 Series has one edge that is both beveled and graduated in 32nds of an inch. The 380 and 385 Series in sizes 36" and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently. 18" (450mm).

The Starrett 240 Double End Pin Vise includes tapered collets. .045-.135" (1.2-3.4mm) Range.

The Starrett 604R-6 6" Spring-Tempered Steel Rule with Inch Graduations feature a satin chrome finish. Graduations at 8ths, 16ths, quick-reading 32nds, and 64ths. 6", 4R Grad, Regular Steel Finish.

The Starrett 380 Series Steel Straight Edge is precision ground and nicely finished to rigid Starrett standards. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Its thickness and design permit it to retain shape and accuracy, but still be portable and easy to handle. The 380 Series is not beveled or graduated. The 385 Series are beveled one edge, but not graduated. The 387 Series has one edge that is both beveled and graduated in 32nds of an inch. The 380 and 385 Series in sizes 36" and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently. 600mm (24").

The Starrett 380 Series Steel Straight Edge is precision ground and nicely finished to rigid Starrett standards. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Its thickness and design permit it to retain shape and accuracy, but still be portable and easy to handle. The 380 Series is not beveled or graduated. The 385 Series are beveled one edge, but not graduated. The 387 Series has one edge that is both beveled and graduated in 32nds of an inch. The 380 and 385 Series in sizes 36" and longer are marked with arrows at two suspension points. If the straight edges are brought to the work and used on edge, they should be suspended at these two points to minimize deflection. Most jobs involve the use of straight edges in the flat position - and it is in this position that we check most stringently. 36" (900mm).