You have no items in your shopping cart.
CS Unitec
CS Unitec MABasic 200 Magnetic Drill with 1-3/8" in Drilling Capacity
CS Unitec's MABasic 200 Magnetic Drill with 1-3/8 Inches in Drilling Capacity.
Features
- - Compact, lightweight, portable design
- - Internal lubrication system
Specifications
| Max Drilling Diameter | Power | Speed |
 |
 |
 |
| 1-3/8 Inch Diameter | 8.2 Amp / 110 V | 450 RPM |
| Max Drilling Diameter: | 1-3/8" |
| Power: | 8.2 Amp / 110 V |
| Speed: | 450 RPM |
| Arbor: | 3/4" Weldon Shank |
| Dimensions: | 12-1/4" H x 9" L x 6-1/2" W |
| Lubrication: | Oil Bottle Included |
| Magnet Base Size: | 6-5/8" L x 3-1/3" W |
| Magnetic Force (1" Plate) | 3080 lbs. |
| Motor Power | 8.2 Amp / 110 Volt |
| Speed | 450 RPM |
| Stroke | 6-1/3" (3-1/3" with geared chuck) |
| Twist Drill: | 1/2" Diameter |
| Weight | 27 lbs. |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
.png)
CS Unitec Drilling
$828.00
CS Unitec MAB 155 Mag Drill with 1-1/2" in Drilling Capacity
CS Unitec MAB 155 Magnetic Base Drill with 1-1/2 Inches in Drilling Capacity. Ultra Compact Portable Magnetic Drill Horizontal Motor Mount For Drilling In Tight Spaces.
Features
- - Ultra Compact at only 7-1/8" high
- - Ratchet-style advancing mechanism for work in spaces with limited clearance
- - Advancing lever can be mounted on either left or right side
- - Accepting cutters with a 3/4" weldon shank and a maximum dept cut of 1-1/2"
Specifications
| Max Drilling Diameter | Power | Speed |
|
|
|
| 1-1/2" | 9.25 Amp / 110 V | 460 RPM |
| Max Drilling Diameter: | 1-1/2" |
| Power: | 9.25 Amp / 110 V |
| Speed: | 460 RPM |
| Arbor: | 3/4" Weldon Shank |
| Dimensions: | 13-5/16" L x 4-3/4" W x 7-1/8" H |
| Magnet Base Size: | 6-5/16" L x 3-3/16" W |
| Magnetic Force (1" Plate): | 2640 lbs. |
| Stroke: | 1-1/2" Diameter |
| Weight: | 24 lbs. |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$1,541.00
CS Unitec MABasic 400 Magnetic Drill with 1-5/8" in Drilling Capacity
CS Unitec MABasic 400 Magnetic Base Drill with 1-5/8 Inches in Drilling Capacity. Two speed portable magnetic drill.
Features
- - Compact, lightweight, portable design
- - 3/4" direct arbor
- - Internal lubrication system
Specifications
| Max Drilling Diameter | Power | Speed (2 Gears) |
|
|
|
| 1-5/8" | 9.5 Amp | 110 V | 430 RPM | 760 RPM |
| Max Drilling Diameter: | 1-5/8" |
| Power: | 9.5 Amp / 110 V |
| Speed (2 Gears): | 430 RPM | 760 RPM |
| Arbor: | 3/4" Weldon Shank |
| Dimensions: | 9-1/2" L x 6-1/2" W x 14" H |
| Magnet Base Size: | 6-5/8" L x 3-1/3" W |
| Magnetic Force (1" Plate): | 3080 lbs. |
| Stroke: | 6-1/3" (3-1/3" with Geared Chuck) |
| Weight: | 27 lbs. |
 MABasic 400 User Manual |
MABasic 400 Part List Schematic |
MABasic 400 Data Sheet |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$1,103.00
CS Unitec MAB 465 Magnetic Drill with 2" in Drilling Capacity
CS Unitec MAB 465 Magnetic Base Drill with 2 Inches in Drilling Capacity. Reversible motor, ideal for tapping and twist drilling.
Features
- - Powerful and reliable
- - 2 Speed oilbath gearbox
- - Integrated cutting oil reservoir
- - Automatic internal lubrication
Safety
- - SafeMag™: Green/Red LED magnetic force indicator for safe operation
- - Internal Cable Routing
- - CoolMag™: Magnet overheating protection
- - Emergency-off function: electronic safety sensor shuts down drill motor if magnet loses contact with material to protect operator and equipment
Specifications
| Max Drilling Diameter | Power | Speed (2 Gears) |
|
|
|
| 2" | 10.5 Amp | 110 V | 50 - 250 RPM | 100 - 450 RPM |
| Max Drilling Diameter: | 2" |
| Power: | 10.5 Amp / 110 V |
| Speed (2 Gears): | 0 - 250 RPM | 50 - 450 RPM |
| Arbor: | 3/4" Weldon Shank |
| Dimensions: | 9-5/8" L x 6-1/2" W x 14-1/8" H |
| Magnet Base Size: | 6-5/8" H x 3-1/3" W |
| Magnetic Force (1" Plate): | 3750 lbs. |
| Stroke: | 6-1/3" |
| Weight: | 29 lbs. |
| Automatic Lubrication: | Included |
| Spindle: | MT2 |
| Tapping Diameter Capacity: | 5/8" |
| Twist Drill Diameter Capacity: | 5/8" |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$1,515.00
CS Unitec MAB 455 Magnetic Drill with 2-1/16" in Drilling Capacity
CS Unitec MAB 455 Magnetic Base Drill with 2-1/16 Inches in Drilling Capacity. High power with keyless quick-change chuck system and optional swivel base.
Features
- - Powerful and reliable
- - Swivel Base
- - Quick change keyless cutter system
- - Integrated cutting oil reservoir
- - Automatic internal lubrication
Safety
- - SafeMag™: Green/Red LED magnetic force indicator for safe operation
- - Internal Cable Routing
- - Simple, ergonomic arrangement of controls for one-handed operation
- - Emergency-off function: electronic safety sensor shuts down drill motor if magnet loses contact with material to protect operator and equipment
Specifications
| Max Drilling Diameter | Power | Speed (2 Gears) |
|
|
|
| 2-1/16" | 10.5 Amp | 110 V | 250 RPM | 450 RPM |
| Max Drilling Diameter: | 2-1/16" |
| Power: | 10.5 Amp / 110 V |
| Speed (2 Gears): | 250 RPM | 450 RPM |
| Arbor: | 3/4" Weldon Shank |
| Dimensions: | 11-5/8" L x 7" W x 17-1/4" H |
| Magnet Base Size: | 6-5/8" H x 3-1/3" W |
| Magnetic Force (1" Plate): | 3750 lbs. |
| Stroke: | 6-1/3" |
| Weight: | 29 lbs. |
| MAB 455 User Manual |
MAB 455 Parts List Schematic |
MAB 455 Data Sheet |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$1,953.00
CS Unitec MAB 485 Magnetic Drill with 2-1/16" in Drilling Capacity
CS Unitec MAB 485 Magnetic Base Drill with 2-1/16 inches in drilling capacity. Versatile for workshop and assembly applications.
Features
- - Powerful and reliable
- - Quick-change keyless cutter system
- - Integrated cutting oil reservoir
- - Automatic internal lubrication
Safety
- - SafeMag™: Green/Red LED magnetic force indicator for safe operation
- - Internal Cable Routing
- - CoolMag™: Magnet overheating protection
- - Simple, ergonomic arrangement of controls for one handed operation
- - Emergency-off function: electronic safety sensor shuts down drill motor if magnet loses contact with material to protect operator and equipment
Specifications
| Max Drilling Diameter | Power | Speed (2 Gears) |
|
|
|
| 2-1/16" | 10.5 Amp | 110 V | 50 - 250 RPM | 100 - 450 RPM |
| Max Annular Cutter Diameter (Inch): | 2-1/16 |
|---|---|
| Max Twist Drill Diameter (Inch): | 7/8 |
| Max Tapping Diameter (Inch): | 15/16 |
| Power (Ampere / Voltage): | 10.5 / 110 |
| Speeds (Rotations Per Minute): | 50 - 250 (1st Gear) | 100 - 450 (2nd Gear) |
| Weight (Pound): | 29 |
| Magnet Base Size (Inch): | 6-5/8 L x 3-1/3 W |
| Dimensions (Inch): | 11-5/8 L x 7 W x 17-1/4 H |
| Magnetic Force - 1" Plate (Pound): | 3,750 |
| Arbor Bore (Inch): | 3/4 Weldon Shank |
| Spindle: | MT2 |
| Automatic Lubrication: | Included |
| Arbor Bore (Inch): | 3/4 Weldon Shank |
| Weight (Pound): | 38 |
| Automatic Lubrication: | Included |
| MAB 485 User Manual |
MAB 485 Parts List Schematic |
MAB 485 Data Sheet |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$1,880.00
CS Unitec AB-4300-2 Pneumatic Magnetic Base Drill
CS Unitec AB-4300-2 Pneumatic Magnetic Base Drill with 2-1/16 inches in drilling capacity. Pneumatic power for hazardous environments - ATEX approved
Features
- - Inherently safer than electromagnetic drills in hazardous atmospheres and wet environments where electricity requires "hot work permits"
- - Completely air-operated - Pressurized coolant system lubricates cutter and reduces risk of sparking
Safety
- - ATEX Certified for hazardous environments
- - Fall-safe permanent magnet-activated on/off by air pressure - if air flow is lost, magnet will not disengage
Specifications
| Max Drilling Diameter | Power | Speeds |
|
|
|
| 2-1/16" | 1.6 HP | 250 - 450 |
| Max Annular Cutter Diameter (Inch): | 2-1/16 |
|---|---|
| Max Twist Drill Diameter (Inch): | 5/8 |
| Pneumatic Air Power (HP): | 1.6 |
| Air Consumption @ 90 PSI: | 64 CFM (1/2" NPT Air Connection) |
| Stroke Length with Cutters (Inch): | 4-7/8 |
| Stroke Length with Twist Drill (Inch): | 1-3/4 |
| No Load Speed (Rotations Per Minute): | 400 |
| Magnet Base Size (Inch): | 3-1/2 L x 8-3/4 W |
| Dimensions (Inch): | 12-1/2 L x 4-3/4 W x 13-1/2 H |
| Height - Closed (Inch): | 13-1/2 |
| Height - Open (Inch): | 17-1/2 |
| Magnetic Force - 1" Plate (Pound): | 1,600 |
| Arbor Bore (Inch): | 3/4 Weldon Shank |
| Weight (Pound): | 38 |
| Automatic Lubrication: | Included |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$5,919.00
CS Unitec MAB 525 Magnetic Drill With 2-1/2" in Drilling Capacity
CS Unitec MAB 525 Magnetic Base Drill with 2-1/2 Inches in Drilling Capacity. High Power, ideal for production use.
Features
- - Powerful and reliable
- - Quick-change keyless cutter system
- - Integrated cutting oil reservoir
- - Automatic internal lubrication
Safety
- - SafeMag™: Green/Red LED magnetic force indicator for safe operation
- - Internal Cable Routing
- - CoolMag™: Magnet overheating protection
- - Simple, ergonomic arrangement of controls for one handed operation
- - Emergency-off function: electronic safety sensor shuts down drill motor if magnet loses contact with material to protect operator and equipment
Specifications
| Max Drilling Diameter | Power | Speed (2 Gears) |
|
|
|
| 2-1/2" | 14.5 Amp | 110 V | 70 - 280 RPM | 180 - 580 RPM |
| Max Annular Cutter Diameter (Inch): | 2-1/2 |
|---|---|
| Max Twist Drill Diameter (Inch): | 1 |
| Maximum Tapping Diameter (Inch): | 15/16 |
| Motor Power (Ampere / Voltage): | 14.5 / 110 |
| Speeds (Rotations Per Minute): | 70 - 280 (1st Gear) | 180 - 580 (2nd Gear) |
| Weight (Pound): | 35 |
| Magnet Base Size (Inch): | 7-1/8 L x 3-1/2 W |
| Dimensions (Inch): | 11-3/4 L x 6-3/4 W x 19 H |
| Magnetic Force (Pound): | 4,500 |
| Arbor Bore (Inch): | 3/4 Weldon Shank |
| Spindle: | MT3 |
| Automatic Lubrication: | Included |
| MAB 525 User Manual |
MAB 525 Parts List Schematic |
MAB 525 Data Sheet |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$2,238.00
CS Unitec MAB 825 Magnetic Base Drill with 4-1/16" in Drilling Capacity
CS Unitec MAB 825 Magnetic Base Drill. Ideal for steel engineering, and plant construction.
Features
- - Powerful and reliable
- - Quick-change keyless cutter system
- - Integrated cutting oil reservoir
- - Automatic internal lubrication
Safety
- - SafeMag™: Green/Red LED magnetic force indicator for safe operation
- - Designed for continuos use
- - Quick-change keyless cutter system
- - Integrated cutting oil reservoir
- - Automatic internal lubrication
Specifications
| Max Cutter Diameter | Power | Speed (4 Gears) |
|
|
|
| 4-1/16" | 16 Amp | 110 V | 40-110 RPM 65-175 RPM 140-360 RPM 220-600 RPM |
| Maximum Annular Cutter Diameter (Inch): | 4-1/16 |
|---|---|
| Maximum Twist Drill Diameter (Inch): | 1-1/4 |
| Maximum Tapping Diameter (Inch): | 1-3/16 |
| Power (Ampere / Volatage): | 16 / 110 |
| Speeds (Rotations Per Minute): | 40 - 110 (1st Gear) | 65 - 175 (2nd Gear) | 140 - 360 (3rd Gear) | 220 - 600 (4th Gear) |
| Weight (Pound): | 68 |
| Stroke (Inch): | 10 |
| Magnet Base Size (Inch): | 8-5/8 L x 4-1/3 W |
| Dimensions (Inch): | 14-7/16 L x 18-5/8 H x 9-7/16 W |
| Magnetic Force (Pound): | 6,600 |
| Arbor Bore (Inch): | 3/4 x 1-1/4 Weldon Shank |
| Spindle: | MT3 |
| Automatic Lubrication: | Included |
| MAB 825 User Manual |
MAB 825 Parts List Schematic |
MAB 825 Data Sheet |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$3,556.00
CS Unitec MAB 845 Magnetic Base Drill with 4-1/16" in Drilling Capacity
CS Unitec MAB 845 Magnetic Base Drill. Ideal for steel engineering, and plant construction.
Features
- - Powerful and reliable
- - Quick-change keyless cutter system
- - Integrated cutting oil reservoir
- - Automatic internal lubrication
|
Optional Swivel Base |
Safety
- - SafeMag™: Green/Red LED magnetic force indicator for safe operation
- - Designed for continuos use
- - Quick-change keyless cutter system
- - Integrated cutting oil reservoir
- - Automatic internal lubrication
Specifications
| Max Cutter Diameter | Power | Speed (4 Gears) |
|
|
|
| 4-1/16" | 16 Amp | 110 V | 40-110 RPM 65-175 RPM 140-360 RPM 220-600 RPM |
Specifications
| Maximum Annular Cutter Diameter (Inch): | 4-1/16 |
|---|---|
| Maximum Twist Drill Diameter (Inch): | 1-1/4 |
| Maximum Tapping Diameter (Inch): | 1-3/16 |
| Power (Ampere / Volatage): | 16 / 110 |
| Speeds (Rotations Per Minute): | 40 - 110 (1st Gear) | 65 - 175 (2nd Gear) | 140 - 360 (3rd Gear) | 220 - 600 (4th Gear) |
| Weight (Pound): | 68 |
| Stroke (Inch): | 10 |
| Magnet Base Size (Inch): | 8-5/8 L x 4-1/3 W |
| Dimensions (Inch): | 14-7/16 L x 18-5/8 H x 9-7/16 W |
| Magnetic Force (Pound): | 6,600 |
| Arbor Bore (Inch): | 3/4 x 1-1/4 Weldon Shank, standard |
| Spindle: | MT3 |
| Automatic Lubrication: | Included |
| Swivel Base: | Included |
| MAB 845 User Manual |
MAB 845 Parts List Schematic |
MAB 845 Operating Manual |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$3,780.00
CS Unitec MAB 1300 Magnetic Base Drill with 6" in Drilling Capacity
CS Unitec MAB 1300 Magnetic Base Drill. Largest capacity in the industry - holes up to 6" diameter, tapping up to 1-5/8" diameter, twist drill up to 1-3/4" diameter.
Features
- - Largest hole cutting capacity in indusrty - 6" diameter
- - Reversible motor for tapping and reaming
- - Infinitely variable torque control and full-wave control electronics
- - 4-speed oilbath gearbox
- - Automatic internal lubrication
|
Use the MAB 1300 with Annular Cutters |
| Use the MAB 1300 with Twist Drill Bits |
|
|
Use the MAB 1300 with Taps |
Safety
- - SafeMag™: Green/Red LED magnetic force indicator for safe operation
- - CoolMag™: Magnet overheating protection
- - Emergency-off function: electronic safety sensor shuts down drill motor if magnet loses contact with material to protect operator and equipment
Specifications
| Max Drilling Diameter | Power | Speed (4 Gears) |
|
|
|
| 6" | 20 Amp | 110 V | 30-80 RPM 50-120 RPM 130-350 RPM 210-550 RPM |
| Max Drilling Diameter: | 6" |
| Power: | 20 Amp / 110 V |
| Speed (4 Gears): | 30 - 80 RPM | 50 - 120 RPM | 130 - 350 RPM | 210 - 550 RPM |
| Arbor: | 1-1/4" (3/4" adapter included) |
| Dimensions: | 19-1/2" L x 10" W x 34-1/2" H |
| Magnet Base Size: | 4-3/4" W x 14" H |
| Magnetic Force (1" Plate): | 23,600 lbs. |
| Stroke: | 3.35' (12" without retainer)" |
| Weight: | 112 lbs. |
| Spindle: | MT4 |
| Tapping Diameter Capacity: | 1-5/8" |
| Twist Drill Diameter Capacity: | 1-3/4" |
| Automatic Lubrication: | Included |
| MAB 825 User Manual |
MAB 825 Parts List Schematic |
MAB 825 Data Sheet |
You Might Also Like
Carbide Tipped Annular Cutters
High Speed Annular Cutters
Metal Cutting Fluids
Magnetic Drill Chuck
Magnetic Base Drills
CS Unitec Drilling
$6,164.00
Powered by nopCommerce & 